Spicy Tangerine Fragrance Oil for Catalytic Lamp

Description

• Age: 18+
  Brand: Ambientair
  Line: the olphactory
  Product Type: aromatic diffuser, refill
  Product Properties: aromatization
  Volume: 500 ml
  Air Freshener Type: reed diffuser refill
  Gender: unisex
  Classification: natural
  Country: Spain
  Made in: Spain
  Caution: avoid contact with eyes, avoid contact with eyes. if contact occurs, rinse eyes thoroughly with water, avoid contact with skin, do not use near open flames or heat sources, highly flammable, may cause an allergic reaction, store out of reach of children

• 1. Choose a location for the lamp: a flat and stable surface, away from heat sources and out of reach of children and/or pets.
  2. Use a funnel to fill the lamp body to 2/3 of its volume with a liquid suitable for catalytic lamps. Remember, the liquid can be neutral or scented, and you can mix them to achieve a lower scent intensity. After filling, clean to remove any liquid residue from the lamp body and surface.
  3. Insert the burner and ensure its wick touches the liquid, with the stone properly positioned above the metal base. If this is the burner’s first use, cover the stone with its cap (to prevent scent evaporation) and allow the wick to soak for 20 minutes.
  4. Remove the cap, light the burner with a lighter, and let the flame burn for two minutes. Wait for a flame about 7 to 10 cm (3 to 4 inches) high, which will reduce as the burner operates. Do not leave the lamp unattended during these two minutes, and never touch the stone during this process.
  5. Blow out the flame, and once it’s extinguished, cover the stone with the protective crown. The stone will be hot, so do not touch it: your lamp is now functioning.
  6. Allow the lamp to purify the air and refresh the atmosphere for about 20 minutes in an area of approximately 10 square meters.
  7. To stop operation, carefully remove the crown, as it may be warm, and cover the hot stone with the metal cap to prevent further burning and scent evaporation.
  8. To prepare for the next use, leave the cap and crown on the metal base to ensure everything is ready for next time.